low signal relay g6a 1 low signal relay g6a ? high sensitivity ? can be driven by digital circuits. low-profile design allows use in 12.70 mm (0.50 in) pc board rack. surge withstand voltage meets fcc part 68 regulation. units can be mounted side by side due to low magnetic leakage. special models available for ultrasonic cleaning and low thermoelectromotive force. unique moving loop (permanent magnet) armature reduc- es relay size, magnetic interference, and contact bounce time. single or dual coil winding types available. ordering information to order: select the part number and add the desired coil voltage rating, (e.g., g6a-274p-st-us- dc12 ). non-latching latching single coil dual coil note: other options available for st10 ultra high reliability, high temperature 85 c (185 f), st1 reverse coil polarity, bs british standard. contact your omron sales representative for details. type contact form model agpd (au clad) ag (au clad) standard dpdt g6a-234p-st-us g6a-274p-st-us 4pdt g6a-434p-st-us g6a-474p-st-us high-sensitivity dpdt g6a-234p-st15-us g6a-274p-st15-us 4pdt g6a-434p-st20-us g6a-474p-st20-us low-sensitivity dpdt g6a-234p-st40-us g6a-274p-st40-us 4pdt g6a-434p-st40-us g6a-474p-st40-us type contact form model agpd (au clad) ag (au clad) standard dpdt g6au-234p-st-us g6au-274p-st-us 4pdt g6au-434p-st-us g6au-474p-st-us type contact form model agpd (au clad) ag (au clad) standard dpdt g6ak-234p-st-us g6ak-274p-st-us 4pdt g6ak-434p-st-us g6ak-474p-st-us low-sensitivity dpdt g6ak-234p-st40-us g6ak-274p-st40-us 4pdt g6ak-434p-st40-us g6ak-474p-st40-us
2 low signal relay g6a specifications contact data coil data standard non-latching dpdt (g6a-234p-st-us, g6a-274p-st-us) high-sensitivity non-latching dpdt (g6a-234p-st15-us, g6a-274p-st15-us) note: the rated current and coil resistance are measured at a coil temperature of 23 c (73 f) with a tolerance of 10%. type g6a-234p-st(15,40)-us, g6a-434p-st(20,40)-us g6ak-234p-st(40)-us, g6ak-434p-st(40)-us g6au-234p-st-us, g6au-434p-st-us g6a-274p-st(15,40)-us, g6a-474p-st(20,40)-us g6ak-274p-st(40)-us, g6ak-474p-st(40)-us g6au-274p-st-us, g6au-474p-st-us load resistive load (p.f. = 1) inductive load (p.f. = 0.4) (l/r = 7 ms) resistive load (p.f. = 1) inductive load (p.f. = 0.4) (l/r = 7 ms) rated load 0.30 a at 125 vac, 1 a at 30 vdc 0.20 a at 125 vac, 0.50 a at 30 vdc 0.50 a at 125 vac, 2 a at 30 vdc 0.25 a at 125 vac, 1 a at 30 vdc contact material agpd (au clad) agpd (au clad) ag (au clad) ag (au clad) carry current 3 a3 a3 a3 a max. operating voltage 250 vac, 220 vdc 250 vac, 220 vdc 250 vac, 220 vdc 250 vac, 220 vdc max. operating current 2 a1 a2 a1 a max. switching capacity 125 va, 60 w 62.50 va, 30 w 125 va, 60 w 62.50 va, 30 w min. permissible load 10 a, 10 mvdc 10 a, 10 mvdc 10 a, 10 mvdc 10 a, 10 mvdc rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 66.70 45 0.07 0.07 70% max. 10% min. 200% at 23c (73f) 150% at 70c (158f) approx. 200 5 40 125 0.20 0.18 6 33.30 180 0.29 0.26 9 22.20 405 0.63 0.57 12 16.70 720 1.10 1.06 24 8.30 2,880 4.50 4.10 48 4.90 9,750 13.70 12.50 approx. 235 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 1.50 100 15 0.02 0.02 80% max. 10% min. 200% approx. 150 3 50600.090.08 4.50 33.30 135 0.22 0.20 5 30 167 0.25 0.21 6 25 240 0.35 0.31 9 16.70 540 0.80 0.70 12 12.50 960 1.35 1.25 24 6.30 3,840 5.60 5.10 48 3.20 15,000 22.50 20.00
low signal relay g6a 3 low-sensitivity non-latching dpdt (g6a-234p-st40-us, g6a-274p-st40-us) standard non-latching 4pdt (g6a-434p-st-us, g6a-474p-st-us) high-sensitivity non-latching 4pdt (g6a-434p-st20-us, g6a-474p-st20-us) low-sensitivity non-latching 4pdt (g6a-434p-st40-us, g6a-474p-st40-us) note: the rated current and coil resistance are measured at a coil temperature of 23 c (73 f) with a tolerance of 10%. rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 133.30 22.50 0.03 0.02 70% max. 10% min. 150% at 23c (73f) 110% at 70c (158f) approx. 400 5 80 62.50 0.08 0.07 6 66.70 90 0.11 0.10 9 44.30 203 0.27 0.23 12 33.30 360 0.52 0.43 24 16.70 1,440 2.10 1.80 48 8.30 5,760 7.50 6.40 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 120 25 0.05 0.05 70% max. 10% min. 150% at 23c (73f) 110% at 70c (158f) approx. 360 5 72.50 69 0.14 0.12 6 60 100 0.20 0.17 9 40 225 0.45 0.38 12 30 400 0.80 0.68 24 15 1,600 3.20 2.70 48 7.50 6,400 12.80 10.90 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 66.70 45 -- -- 70% max. 10% min. 200% at 50c (122f) approx. 200 5 40 125 -- -- 6 33.30 180 -- -- 9 22.20 405 -- -- 12 16.70 720 -- -- 24 8.30 2,880 -- -- 48 4.20 11,520 -- -- rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) pick-up voltage dropout voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 133.30 22.50 0.04 0.02 70% max. 10% min. 150% at 23c (73f) 110% at 70c (158f) approx. 400 5 80 62.50 0.12 0.09 6 66.70 90 0.17 0.13 9 44.30 203 0.42 0.30 12 33.30 360 0.70 0.52 24 16.70 1,440 2.80 2.20 48 8.30 5,760 10.20 8.60
4 low signal relay g6a standard single coil latching dpdt (g6au-234p-st-us, g6au-274p-st-us) standard dual coil latching (g6ak-234p-st-us, g6ak-274p-st-us) dual coil latching low-sensitivity dpdt (g6ak-234p-st40-us, g6ak-274p-st40-us) standard single coil latching 4pdt (g6au-434p-st-us, g6au-474p-st-us) rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 33.70 89 0.15 0.11 70% max. 70% min. 200% at 23c (73f) 150% at 70c (158f) approx. 100 5 20 250 0.44 0.35 6 16.70 360 0.64 0.48 9 11.10 810 1.38 1.07 12 8.30 1,440 2.50 2 24 4.20 5,760 9.20 7.20 48 2.50 19,000 28.50 22 approx. 120 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) set coil reset coil armature off armature on armature off armature on % of rated voltage 3 66.70 45 0.04 0.03 0.03 0.04 70% max. 70% min. 200% at 23c (73f) 150% at 70c (158f) approx. 200 5 36 139 0.11 0.08 0.08 0.11 approx. 180 6 30 200 0.16 0.12 0.12 0.16 9 20 450 0.38 0.28 0.28 0.38 12 15 800 0.60 0.45 0.45 0.60 24 7.50 3,200 2.10 1.50 1.50 2.10 48 4.20 11,520 8.50 6.30 6.30 8.50 approx. 200 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) set coil reset coil armature off armature on armature off armature on % of rated voltage 3 120 25 0.02 0.01 0.01 0.02 70% max. 70% min. 150% at 23c (73f) 110% at 70c (158f) approx. 360 5 72.50 69 0.05 0.04 0.04 0.05 6 60 100 0.07 0.05 0.05 0.07 9 40 225 0.16 0.12 0.12 0.16 1230 400 0.280.200.200.28 24 15 1,600 1.10 0.75 0.75 1.10 48 7.50 6,400 4 2.90 2.9 4 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) armature off armature on % of rated voltage 3 106.80 28.10 0.03 0.02 70% max. 70% min. 150% at 23c (73f) 110% at 70c (158f) approx. 320 5 64 78.10 0.08 0.06 6 53.30 112.50 0.11 0.08 9 35.60 253 0.25 0.18 12 26.70 450 0.45 0.32 24 13.30 1,800 1.80 1.30 48 6.70 7,200 7.00 5.20
low signal relay g6a 5 standard dual coil latching 4pdt (g6ak-434p-st-us, g6ak-474p-st-us dual coil latching low-sensitivity 4pdt (g6ak-434p-st40-us, g6ak-474p-st40-us) note: the rated current and coil resistance are measured at a coil temperature of 23 c (73 f) with a tolerance of 10%. rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) set coil reset coil armature off armature on armature off armature on % of rated voltage 3 106.80 28.10 0.03 0.02 0.02 0.03 70% max. 70% min. 150% at 23c (73f) 110% at 70c (158f) approx. 320 5 64 78.10 0.08 0.06 0.06 0.08 6 53.30 112.50 0.11 0.08 0.08 0.11 9 35.60 253 0.25 0.18 0.18 0.25 12 26.70 450 0.45 0.32 0.32 0.45 24 13.30 1,800 1.80 1.30 1.30 1.80 48 6.70 7,200 7.00 5.20 5.20 7.00 rated voltage (vdc) rated current (ma) coil resistance ( ? ) coil inductance (ref. value) (h) set pick-up voltage reset pick-up voltage maximum voltage power consumption (mw) set coil reset coil armature off armature on armature off armature on % of rated voltage 3 120 25 0.02 0.02 0.02 0.02 70% max. 70% min. 150% at 23c (73f) 110% at 70c (158f) approx. 360 5 72.50 69 0.07 0.05 0.05 0.07 6 60 100 0.09 0.08 0.08 0.09 9 40 225 0.18 0.14 0.14 0.18 12 30 400 0.30 0.23 0.23 0.30 24 15 1,600 1.20 0.82 0.82 1.20 48 7.50 6,400 4.40 3.20 3.20 4.40
6 low signal relay g6a characteristics note: data shown are of initial value. characteristic data maximum switching capacityambient temperature vs. electrical service life dpdt maximum voltage (reference only) dpdt type non-latching latching contact resistance 50 m ? max. operate (set) time dpdt 5 ms max. (mean value approx. 3 ms) 5 ms max. (mean value approx. 2.50 ms) 4pdt 7 ms max. (mean value approx 3.80 ms) 7 ms max. (mean value approx. 3.30 ms) release (reset) time dpdt 3 ms max. (mean value approx. 1.20 ms) 5 ms max. (mean value approx. 2.50 ms) 4pdt 5 ms max. (mean value approx. 1.30 ms) 7 ms max. (mean value approx. 2.70 ms) bounce time operate actual value approx. 0.50 ms release actual value approx. 0.50 ms operating frequency mechanical 36,000 operations/hour electrical 1,800 operations/hour (under rated load) insulation resistance 1,000 m ? min. (at 500 vdc) dielectric strength 1,000 vac, 50/60 hz for 1 minute between coil and contacts 1,000 vac, 50/60 hz for 1 minute between contacts of different poles 1,000 vac, 50/60 hz for 1 minute between contacts of same pole 250 vac, 50/60 hz for 1 minute between set and reset coils surge withstand voltage 1,500 v 10 x 16 s (conforms to fcc part 68) vibration mechanical durability 10 to 55 hz; 5 mm (0.20 in) double amplitude malfunction durability 10 to 55 hz; 3.3 mm (0.13 in) double amplitude shock mechanical durability 1,000 m/s 2 (approx. 100g malfunction durability dpdt: 500 m/s 2 (approx. 50 g); 4pdt: 300 m/s 2 (approx. 30 g) ambient temperature -40 to 70 c (-40 to 158 f) humidity 45% to 85% rh service life mechanical 100 million operations min. (at 36,000 operations/hour) electrical see ?characteristic data? weight dpdt approx. 3.5 g (0.12 oz) 4pdt approx. 6.0 g (0.21 oz)
low signal relay g6a 7 dimensions unit: mm (inch) non-latching g6a-234p-st(15,40)-us, g6a-274p-st(15,40)-us g6a-434p-st(20,40)-us, g6a-474p-st(20,40)-us latching g6au-234p-st-us, g6au-274p-st-us g6ak-234p-st(40)-us, g6ak-274p-st(40)-us terminal arrangement/ internal connections (bottom view) mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) mounting holes (bottom view) terminal arrangement/ internal connections (bottom view) mounting holes (bottom view)
8 low signal relay g6a g6au-434p-st-us, g6au-474p-st-us g6ak-434p-st(40)-us, g6ak-474p-st(40)-us note: and indicate mounting orientation marks. approvals ul (file no. e41515)/csa (file no. lr24825) note: 1. the rated values approved by each of the safety standards (e.g., ul and csa) may be different from the performance characterist ics individually defined in this catalog. 2. in the general interest of product improvement, specifications are subject to change. 3. ul1950 recognition. terminal arrangement/ internal connections (bottom view) mounting holes (bottom view) type contact form coil rating contact ratings g6a-234p-st-us g6a-234p-st40-us g6a-234p-st15-us dpdt 1 to 48 vdc 0.60 a, 125 vac 1 a, 30 vdc 0.60 a, 110 v+dc g6a-274p-st-us g6a-274p-st40-us g6a-274p-st15-us 0.60 a, 125 vac 2 a, 30 vdc 0.60 a, 110 v g6a-434p-st-us g6a-434p-st20-us g6a-434p-st40-us 4pdt 1 to 48 vdc 0.60 a, 125 vac 1 a, 30 vdc 0.60 a, 110 v g6a-474p-st-us g6a-474p-st20-us g6a-474p-st40-us 0.60 a, 125 vac 2 a, 30 vdc 0.60 a, 110 v g6ak-234p-st(40)-us g6au-234p-st-us dpdt 1 to 48 vdc 0.60 a, 125 vac 1 a, 30 vdc 0.60 a, 110 v g6ak-274p-st(40)-us g6au-274p-st-us 0.60 a, 125 vac 2 a, 30 vdc 0.60 a, 110 v g6ak-434p-st(40)-us g6au-434p-st(40)-us 4pdt 1 to 48 vdc 0.60 a, 125 vac 1 a, 30 vdc 0.60 a, 110 v g6ak-474p-st(40)-us g6au-474p-st(40)-us 0.60 a, 125 vac 2 a, 30 vdc 0.60 a, 110 v terminal arrangement/ internal connections (bottom view) mounting holes (bottom view)
low signal relay g6a 9 omron electronic components, llc terms and conditions of sales 1. definitions : the words used herein are defined as follows. (a) terms: these terms and conditions (b) seller: omron electronic components llc and its subsidiaries (c) buyer: the buyer of products, including any end user in section iii through vi (d) products: products and/or services of seller (e) including: including without limitation 2. offer; acceptance: these terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products by seller. seller hereby objects to any terms proposed in buyer's purchase order or other documents which are inconsistent with, or in addition to, these te r ms . 3. distributor : any distributor shall inform its customer of the contents after and including section iii of these terms. 1. prices; payment : all prices stated are current, subject to change without notice by seller. buyer agrees to pay the price in effect at time of shipment. payments for products received are due net 30 days unless otherwise stated in the invoice. buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. discounts : cash discounts, if any, will apply only on the net amount of invoices sent to buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to seller's payment terms and (b) buyer has no past due amounts owing to seller. 3. interest : seller, at its option, may charge buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. orders : seller will accept no order less than 200 u.s. dollars net billing. 5. currencies : if the prices quoted herein are in a currency other than u.s. dollars, buyer shall make remittance to seller at the then current exchange rate most favorable to seller; provided that if remittance is not made when due, buyer will convert the amount to u.s. dollars at the then current exchange rate most favorable to seller available during the period between the due date and the date remittance is actually made. 6. governmental approvals : buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the products. 7. taxes : all taxes, duties and other governmental charges (other than general real property and income taxes) , including any interest or penalties thereon, imposed directly or indirectly on seller or required to be collected directly or indirectly by seller for the manufacture, production, sale, delivery, importation, consumption or use of the products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by buyer to seller. 8. financial : if the financial position of buyer at any time becomes unsatisfactory to seller, seller reserves the right to stop shipments or require satisfactory security or payment in advance. if buyer fails to make payment or otherwise comply with these terms or any related agreement, seller may (without liability and in addition to other remedies) cancel any unshipped portion of products sold hereunder and stop any products in transit until buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by buyer. buyer shall in any event remain liable for all unpaid accounts. 9. cancellation; etc: orders are not subject to rescheduling or cancellation unless buyer indemnifies seller fully against all costs or expenses arising in connection therewith. 10. force majeure : seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. shipping; delivery: unless otherwise expressly agreed in writing by seller: (a) all sales and shipments of products shall be fob shipping point (unless otherwise stated in writing by seller) , at which point title to and all risk of loss of the products shall pass from seller to buyer, provided that seller shall retain a security interest in the products until the full purchase price is paid by buyer; (b) delivery and shipping dates are estimates only; and (c) seller will package products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. claims: any claim by buyer against seller for shortage or damage to the products occurring before delivery to the carrier must be presented in detail in writing to seller within 30 days of receipt of shipment. 1. suitability: it is the buyer?s sole respoinsibility to ensure that any omron product is fit and sufficient for use in a motorized vehicle application. buyer shall be solely responsible for determining appropriateness of the particular product with respect to the buyer?s application including (a) electrical or electronic components, (b) circuits, (c) system assemblies, (d) end product, (e) system, (f) materials or substances or (g) operating environment. buyer acknowledges that it alone has determined that the products will meet their requirements of the intended use in all cases. buyer must know and observe all prohibitions of use applicable to the product/s. 2. use with attention: the followings are some examples of applications for which particular attention must be given. this is not intended to be an exhaustive list of all possible use of any product, nor to imply that any use listed may be suitable for any product: (a) outdoor use, use involving potential chemical contamination or electrical interference. (b) use in consumer products or any use in significant quantities. (c) energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) systems, machines, and equipment that could present a risk to life or property. 3. prohibited use: never use the product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the product is properly rated and installed for the intended use within the overall equipment or system. 4. motorized vehicle application: use of any product/s for a motorized vehicle application must be expressly stated in the specification by seller. 5. programmable products: seller shall not be responsible for the buyer's programming of a programmable product. 1. warranty : seller's exclusive warranty is that the products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by seller (or such other period expressed in writing by seller). seller makes no warranty or representation, express or implied, about all other warranties, non-infringement, merchantability or fitness for a particular purpose of the products. 2. buyer remedy : seller's sole obligation hereunder shall be to replace (in the form originally shipped with buyer responsible for labor charges for removal or replacement thereof) the non-complying product or, at seller's election, to repay or credit buyer an amount equal to the purchase price of the product; provided that there shall be no liability for seller or its affiliates unless seller's analysis confirms that the products were handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. return of any products by buyer must be approved in writing by seller before shipment. 3. limitation on liability : seller and its affiliates shall not be liable for special, indirect, incidental or consequential damages, loss of profits or production or commercial loss in any way connected with the products, whether such claim is based in contract, warranty, negligence or strict liability. further, in no event shall liability of seller or its affilitates exceed the individual price of the product on which liability is asserted. 4. indemnities : buyer shall indemnify and hold harmless seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses ( including attorney's fees and expenses ) related to any claim, investigation, litigation or proceeding ( whether or not seller is a party ) which arises or is alleged to arise from buyer's acts or omissions under these terms or in any way with respect to the products. 1. intellectual property : the intellectual property embodied in the products is the exclusive property of seller and its affiliates and buyer shall not attempt to duplicate it in any way without the written permission of seller. buyer (at its own expense) shall indemnify and hold harmless seller and defend or settle any action brought against seller to the extent that it is based on a claim that any product made to buyer specifications infringed intellectual property rights of another party. 2. property; confidentiality : notwithstanding any charges to buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of seller. all information and materials supplied by seller to buyer relating to the products are confidential and proprietary, and buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. performance data : performance data is provided as a guide in determining suitability and does not constitute a warranty. it may represent the result of seller's test conditions, and the users must correlate it to actual application requirements. 4. change in specifications : product specifications and description may be changed at any time based on improvements or other reasons. it is seller?s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. however, some specifications of the product may be changed without any notice. 5. errors and omissions : the information on seller?s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. export controls : buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the products or information provided by seller; (b) sale of products to forbidden or other proscribed persons or organizations; (c)disclosure to non-citizens of regulated technology or information. 1. waiver : no failure or delay by seller in exercising any right and no course of dealing between buyer and seller shall operate as a waiver of rights by seller. 2. assignment : buyer may not assign its rights hereunder without seller's written consent. 3. law : these terms are governed by illinois law (without regard to conflict of laws) . federal and state courts in illinois have exclusive jurisdiction for any dispute hereunder. 4. amendment : these terms constitute the entire agreement between buyer and seller relating to the products, and no provision may be changed or waived unless in writing signed by the parties. 5. severability : if any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. i. general ii. sales iii. pre cautions iv. warranty and limitation v. information; etc. vi. miscellaneous
10 low signal relay g6a certain precautions on specifications and use 1. suitability for use . seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the combination of the product in buyer's application or use of the product. at buyer's request, seller will pro- vide applicable third party certification documents identifying ratings and limi- tations of use which apply to the product. this information by itself is not sufficient for a complete determination of the suitability of the product in com- bination with the end product, machine, system, or other application or use. buyer shall be solely responsible for determining appropriateness of the par- ticular product with respect to buyer's application, product or system. buyer shall take application responsibility in all cases but the following is a non- exhaustive list of applications for which particular attention must be given: (i) outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) use in consumer products or any use in significant quantities. (iv) systems, machines and equipment that could present a risk to life or property. please know and observe all prohibitions of use applicable to this product. never use the product for an application involving serious risk to life or property without ensuring that the system as a whole has been designed to a ddress the risks, and that the omron product is properly rated and installed for the intended use within the overall equipment or system. 2. programmable products . seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. performance data . performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a war- ranty. it may represent the result of seller's test conditions, and the users must correlate it to actual application requirements. actual performance is subject to seller's warranty and limitations of liability. 4. change in specifications . product specifications and accessories may be changed at any time based on improvements and other reasons. it is our prac- tice to change part numbers when published ratings or features are changed, or when significant construction changes are made. however, some specifica- tions of the product may be changed without any notice. when in doubt, spe- cial part numbers may be assigned to fix or establish key specifications for your application. please consult with your seller representative at any time to confirm actual specifications of purchased product. 5. errors and omissions . the information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. rohs compliance . where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the european union's directive on the restriction of certain hazardous substances ("rohs"), although the requirements of rohs do not take effect until july 2006. these requirements may be subject to change. please consult our website for current information. omron on-line global - http://www.omron.com usa - http://www.components.omron.com cat. no. j01c-e-01 printed in usa omron electronic components llc 55 e. commerce drive, suite b schaumburg, il 60173 847-882-2288 01/07 specifications subject to change without notice complete ?terms and conditions of sale? for product purchase and use are on omron?s website at http://www.components.omron.com ? under the ?about us? tab, in the legal matters section. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. to convert grams into ounces, multiply by 0.03527.
|
